The db-2200
The db-2200 Type 2 sound level
meter offers advanced noise measurement and analysis at a competitive price.
Use for industrial, military, law enforcement and environmental
applications.
It features five operating modes
and simple one button calibration. It monitors and displays SPL, Leq, Run Time, Maximum SPL,
Minimum SPL and % Overload.
A large liquid crystal display provides
up-to-the-second readings in 0.1dB increments. Convenient slide switches and
large buttons make the meter extremely
easy-to-use, even when wearing gloves.
With it's molded polymer case, the db-2200 sound level
meter is lightweight and compact.
5 Minute Simplicity Guarantee!
The db-2200 sound level meter design is so intuitive that you will be up
and running within 5 minutes or you can return it for a full refund.
Related Documentation:
db2200 Spec Sheet (PDF)
795k
Technical Specs
Measurement Range:
- 30 to 140 dBA
- 40 to 140 dBC
- 43 to 143 dBA Peak
Standards:
- Type 2, ANSI S1.4-1983 (R1997)
- IEC60651-1979 EN60651
- IEC 60804-1985
- CE
Mark
- UL
- CSA
- EEx Pending: MSHA 2G
Microphone:
- Removable 0.5” pre-polarized condenser (electret)
Outputs:
Batteries:
- (1) One 9-volt alkaline battery, provides approximately 25 hours of operation
Temperature Range:
- Operating: -14°F to 122°F (-10°C to 50°C)
- Storage: -4°F to 140°F (-20°C to 60°C)
Size:
- 2.8” x 7.0” x 1.3” (7cm x 18cm x 3.3 cm) add 0.5” for microphone
Weight:
- 10.3 oz. (293 g) including preamp, microphone and batteries
Back to top of page |
