The db-2100
The Metrosonics db-2100 is an affordable, easy-to-use, Type 2
sound level meter. It is perfect for quick and accurate general noise
measurements in many industrial, military, law enforcement and environmental
applications.
A large liquid crystal display provides
up-to-the-second readings in 0.1dB increments. Convenient slide switches and
large buttons make the meter extremely
easy-to-use, even when wearing gloves. Calibrating the db-2100 sound level
meter is a simple one button operation.
With it's molded polymer case, the db-2100 sound level
meter is lightweight and compact.
5 Minute Simplicity Guarantee!
The db-210 sound level meter design is so intuitive that you will be up
and running within 5 minutes or you can return it for a full refund.
Related Documentation:
db2100 Spec Sheet (PDF)
795k
Technical Specs
Measurement
- Range: 30 to 140 dBA
- 40 to 140 dBC
- 43 to 143 dBA Peak
Standards:
- Type 2, ANSI S1.4-1983 (R1997)
- IEC60651-1979
- EN60651
- IEC 60804-1985
- CE Mark
- UL
- CSA
- EEx
- Pending: MSHA 2G
Microphone:
- Removable 0.5” pre-polarized condenser (electret)
Outputs:
Batteries:
- (1) One 9-volt alkaline battery, provides approximately 25 hours of
operation
Temperature:
- Range: Operating: -14°F to 122°F (-10°C to 50°C)
- Storage: -4°F to 140°F (-20°C to 60°C)
- Size: 2.8” x 7.0” x 1.3” (7cm x 18cm x 3.3 cm) add 0.5”
for microphone
Weight:
- 10.3 oz. (293 g) including preamp, microphone and batteries
Back to top of page |
